Skip to content
Call or text (815) 420-3195
A just-remodeled kitchen with white shaker cabinets and gray counters under a layer of drywall dust, a shop vacuum and folded microfiber cloths on the floor

Post-Construction Cleaning in Rockford, IL

Updated

Get a free quote

We reply with a price. Nothing is booked until you say yes.

Rather talk? Call (815) 420-3195 or text us.

Short answer

Want a price on post-construction cleaning?

Call, text, or send the form. You get a flat price back before anything is booked.

What the final clean covers

Construction dust is finer than household dust and it gets everywhere a remodel touched and plenty it didn't: on top of door frames, inside the new cabinets and drawers, in window tracks, on every light fixture and ceiling fan blade, in the furnace registers and on the floor under the new appliances. A post-construction clean is usually done in one or two passes:

  • Rough clean while trades are still finishing: debris, sweeping, the worst of the dust so the floors can be protected again.
  • Final clean after the last trade leaves: HEPA vacuuming top to bottom, wiping every surface inside and out, stickers and labels off windows and fixtures, paint and caulk specks off glass and hard floors, floors washed.
  • Touch-up after the punch list, when a painter or electrician came back and left a little more dust.

National guides price it by square foot, about $0.15 to $0.60: the low end for a light final clean in a small area, the high end for a whole house after drywall and flooring. Most visits run a full day or more with a crew. The cost page has the size table.

Older Rockford houses and lead dust

The City of Rockford's median home was built in 1963, and 74.3% of its housing units went up before 1980 (Census Bureau). That matters after a remodel because of the EPA's Renovation, Repair and Painting rule. It covers paid work that disturbs paint in housing built before 1978: remodeling, electrical, plumbing, painting prep, carpentry and window replacement. Jobs that disturb 6 square feet or less of paint per room inside are exempt, but window replacement and demolition of painted surfaces are always covered (EPA). Illinois has no program of its own, so the EPA runs it here.

Under the rule, the renovation firm has to clean the work area until no dust, debris or residue remains: walls from the ceiling down with a HEPA vacuum or a damp cloth, every surface vacuumed with a HEPA vacuum, everything wiped, and hard floors mopped with the wash water kept separate from the rinse water. Then a certified renovator checks it, wiping windowsills, floors and counters with wet disposable cloths and comparing each one to the EPA's cleaning verification card (40 CFR 745.85).

A house cleaner hired afterward does not replace that step, and shouldn't be asked to. Before you book the final clean in a pre-1978 home, ask the contractor whether the cleaning verification was done. The rule generally does not apply to owners working on their own home, but it does if you rent out all or part of it (EPA).

Scheduling it with the job

  • Book the final clean for after the last trade is done, not the day the drywall is sanded.
  • Change or vacuum the furnace filter and registers after sanding, or the dust comes back through the vents.
  • Leave the debris to the contractor. Construction debris costs $25 per hopper with the hauler in Loves Park and Machesney Park.
  • Leftover cleaners, solvents and pool chemicals can go to Rockford's free household hazardous waste site at 3315 Kishwaukee Street; latex paint no longer can (City of Rockford).

New builds and move-in

On a new house the final clean is often booked by the builder or the buyer before move-in. It overlaps with a move-in clean: inside every cabinet and drawer, appliances, bathrooms and floors, plus the construction extras like labels, paint specks and window tracks. If the house sat a while between the builder's clean and the closing, a lighter move-in clean is usually enough.

Where this is done

Post-Construction Cleaning in Rockford and the towns around it. Each town page has its own water hardness, trash hauler and rental rules; the rest are on the service area page.

Common questions

Post-Construction Cleaning: questions

How much does post-construction cleaning cost?

About $0.15 to $0.60 per square foot in national guides, roughly $200 to $1,200 for 1,000 to 2,000 square feet. Whole-house remodels and heavy drywall dust sit at the high end. See the cost page.

What is included in post-construction cleaning?

HEPA vacuuming top to bottom, wiping every surface inside and out including inside cabinets and drawers, window tracks, light fixtures and registers, removing labels and paint specks, and washing the floors.

Does a cleaner handle lead dust after a remodel?

No. In a pre-1978 home, the EPA's RRP rule makes the renovation firm clean the work area and a certified renovator verify it. A house cleaner comes after that. See EPA's RRP program.

How long does post-construction cleaning take?

A small remodel can be a few hours; a whole house after drywall and flooring is usually a full day or more with a crew, sometimes split into a rough clean and a final clean.

When should I schedule the cleaning after a remodel?

After the last trade leaves and the punch list is done. Cleaning before the painter's last visit or the final sanding means paying for it twice.

Post-Construction Cleaning around Rockford

Tell us the bedrooms, bathrooms and dates. We reply with a flat price, and nothing is booked until you agree to it.